Texas Service Center Moves Away From Manual Methods
Making the switch from manual processing methods to new automated machinery can be intimidating. With the right machine tailored to their individual needs, Metals 2 Go has not only seen a 50% reduction in labor, but also a 25% increase in productivity.
“My favorite project was this 35’ steel beam we ran right after installing the Peddi XDM-630 drill/saw line. It had 560 holes in it, which would have taken one of our guys over a week and a half to get through with a mag drill. We did it on the Peddi XDM-630 in 58 minutes. All 3 spindles were going, drilling through the legs and the web at the same time. I was just blown away!”
My favorite project was this 35' beam... It had 560 holes in it, we did it on the Peddi XDM-630 in 58 minutes!
Enter Today for a Chance to Win FREE Machinery
Gift cards and other Peddinghaus merchandise included
Normal text message rates apply. Text “STOP” to opt out. Text “HELP” for help. Up to 3 msgs / month. Terms https://www.peddinghaus.com/terms/1